How to monitor the camera in extreme weather

date: 2018-11-01
浏览次数: 24

In order to ensure that the surveillance camera can work normally under the harsh environment of high, low temperature, sand, rain, ice and snow, it will generally adopt various protective covers to extend its working life. The protective cover must protect the camera and lens from It is contaminated by dust, impurities and corrosive gases. At the same time, it must be able to cooperate with the installation site to achieve the purpose of preventing damage. Secondly, the protective cover should be equipped with heaer pad. polyimide heater pad and silicone heater pad are commonly used. The heater pad is thin, soft, and can be customized in shape. It can be installed near the lens without affecting the installation, and will not block the lens. It will be heated in a lower temperature environment to raise the internal temperature of the shield and ensure the camera/lens work normally. The built-in or external fan can circulate the air inside the hood and reduce the temperature inside the hood. In the place where there is less wind and sand, it is also necessary to configure the washer to clean the window glass at any time with the wiper to ensure the image monitoring effect.

How to monitor the camera in extreme weather


Case /
2018 - 11 - 01
Seat heating is one of the most basic advantages of smart toilets. The seat-heated toilet can enhance our life's happiness. In the winter, we don't have to worry about the icy seat. After sitting up, ...
2018 - 11 - 01
In the past, electric cookers were also known as slow cookers. This 'slow' word is mainly for its heating rate. A major cause of heating speed is the heating method. From the relatively early tropical...
2018 - 11 - 01
It is well known that kitchen grease has high adhesion and it is difficult to clear and clean ordinary water. The 'hot dry cleaning' technology is based on the principle that the condensed oil stain w...
2018 - 11 - 01
The 3D printer hot bed is a unique accessory for FDM (melt-stack) printers. It is a polyimide heater pad or a silicone heater sheet attached to the bottom of the hot bed. The main purpose is to preven...
Link:
Leaving a message
Contact Us
Search this site
Mobile phone access
Company switchboard:+86 755 84092289 ext.810
Mobile phone:+86 13510353134
Company fax:+86 755 84092269
Skype:emma-qian
Website:http://en.szfulianda.com
Address:Building 2,Tonghe Industrial Park,No.26 Fuping North Road, Pingdi Subdistrict, Longgang District, Shenzhen, Guangdong, China

Browse Mobile Station

Copyright ©2019 - 2020 Shenzhen Fulianda Heater Co., Ltd.
犀牛云提供企业云服务
TOP
X
5

电话号码管理

1

QQ设置

3

SKYPE 设置

4

阿里旺旺设置

6

二维码管理

8

邮箱管理

展开
Hi, how can I help you?Emma