3D printer heater

date: 2018-11-01
浏览次数: 134

The 3D printer hot bed is a unique accessory for FDM (melt-stack) printers. It is a polyimide heater pad or a silicone heater sheet attached to the bottom of the hot bed. The main purpose is to prevent curling during 3D printing. So why is 3D printing curled? The curling is caused by the cooling shrinkage of the material. The shrinkage rates of different materials are different, so the degree of warping is also different, but one thing is certain, the curling edge is certain and inevitable, and only the influence of the curling edge can be alleviated. So some people think that printing PLA does not require a hot bed. In fact, this idea is wrong. Printing PLA from different manufacturers has different effects. Some of the edges are not obvious, and some will be very serious.

Hot beds can't eradicate the edges, only reduce the weakened edges. The main principle is to heat the hot bed through the heater pad to maintain the print at a higher temperature (PLA 60 ° C ABS 100 ° C), which can prevent the material from cooling during the printing process, thus reducing the model curl.

Polyimide heater pad and silicone heater sheet can be customized according to customers' different requirements for external shape, size and voltage power. Easy to install and control temperature adjustment. It is currently the preferred product for 3D printing hot bed heating.

3D printer heater



Case /
2018 - 11 - 01
Seat heating is one of the most basic advantages of smart toilets. The seat-heated toilet can enhance our life's happiness. In the winter, we don't have to worry about the icy seat. After sitting up, ...
2018 - 11 - 01
In the past, electric cookers were also known as slow cookers. This 'slow' word is mainly for its heating rate. A major cause of heating speed is the heating method. From the relatively early tropical...
2018 - 11 - 01
It is well known that kitchen grease has high adhesion and it is difficult to clear and clean ordinary water. The 'hot dry cleaning' technology is based on the principle that the condensed oil stain w...
2018 - 11 - 01
The 3D printer hot bed is a unique accessory for FDM (melt-stack) printers. It is a polyimide heater pad or a silicone heater sheet attached to the bottom of the hot bed. The main purpose is to preven...
Link:
Leaving a message
Contact Us
Search this site
Mobile phone access
Company switchboard:+86 755 84092289 ext.810
Mobile phone:+86 13510353134
Company fax:+86 755 84092269
Skype:emma-qian
Website:http://en.szfulianda.com
Address:Building 2,Tonghe Industrial Park,No.26 Fuping North Road, Pingdi Subdistrict, Longgang District, Shenzhen, Guangdong, China

Browse Mobile Station

Copyright ©2019 - 2020 Shenzhen Fulianda Heater Co., Ltd.
犀牛云提供企业云服务
TOP
X
5

电话号码管理

1

QQ设置

3

SKYPE 设置

4

阿里旺旺设置

6

二维码管理

8

邮箱管理

展开
Hi, how can I help you?Emma